-
- Advertisement
Motor Problems
6 posts
• Page 1 of 1
Motor Problems
by wetaline » Fri Jun 11, 2010 3:37 pm
I have a '96 Johnson 130. the power trim motor is out on it. The motor's in the down position. Having trouble getting the manual release screw out to pick it up. Anyone have any suggestions besides taking the motor off? Missing the fishing. Tight lines to all.
- wetaline
- Posts: 2
- Joined: Thu Mar 25, 2010 3:05 pm
Re: Motor Problems
by jsmoke222000 » Fri Jun 11, 2010 4:14 pm
Not sure what a new trim motor costs these days, but it sounds expensive. This is probably a good question for Ray or OldFrog. They seem to know a lot about fixing stuff. Sorry you are having trouble man.
-
jsmoke222000 - Site Admin
- Posts: 1126
- Joined: Mon Mar 16, 2009 8:27 am
- Location: Lake Chuck
2012 Majek Extreme 2200
Re: Motor Problems
by Ray » Fri Jun 11, 2010 7:05 pm
It could be a relay under the cowling. Or a fuse.
I never had an issue with a trim motor or pump.
I never had an issue with a trim motor or pump.
-
Ray - Site Admin
- Posts: 1643
- Joined: Sat Oct 03, 2009 10:40 pm
- Location: Lake Charles, La.
2009 Cobia 19 Bay
Re: Motor Problems
by gerald » Fri Jun 11, 2010 11:04 pm
- gerald
- Posts: 316
- Joined: Fri Jun 11, 2010 10:45 pm
Re: Motor Problems
by speckilla89 » Sun Aug 01, 2010 1:18 pm
You Probably resolved the issue already. MY Trim Was acting up and got stuck in the down position I had to use a jack and a 4x6 to get it up. I changed out the cylinoid for my trim and it works like new now...just a thought
A Bad Day of Fishing is Still Better than a good day at work!
- speckilla89
- Posts: 45
- Joined: Wed Jul 28, 2010 5:01 pm
- Location: Lake Charles,LA
Re: Motor Problems
by Ray » Sun Aug 01, 2010 2:35 pm
-
Ray - Site Admin
- Posts: 1643
- Joined: Sat Oct 03, 2009 10:40 pm
- Location: Lake Charles, La.
2009 Cobia 19 Bay
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests
-
- Advertisement
